Hotpoint WF321P

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WF321P

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 5, 2011 at 11:00 am #60803
    ipoole
    Participant

    Morning all. I don`t post very often, but I hope that someone can answer this for me.
    Hotpoint WF321P. Do I have to fit a complete dispensor assembly to this machine or will valve pt no C00110333 fit onto the existing dispensor ? Cheers Ian

    February 5, 2011 at 11:17 am #343712
    don
    Moderator

    Re: Hotpoint WF321P

    Hi Ian

    Moved you to Trade tech enquiries, more chance of an answer here 😉

    Don

    February 5, 2011 at 2:19 pm #343713
    admin
    Keymaster

    Re: Hotpoint WF321P

    Depends on the old valve in the machine …..if the old valve has the glued on Extension bit …on it (that splits and leaks) then no it will not reach to the back Of the machine….so the new complete soap box and valve will be needed

    The soap box has been made longer so it reaches the back of the machine with the new Valve on it

    canufixit

    February 5, 2011 at 2:23 pm #343714
    helo_75
    Participant

    its a wf321, isnt that an earlier type, not the one with a swing out drawer?

    February 5, 2011 at 2:24 pm #343715
    helo_75
    Participant

    p/num c00143588

    February 5, 2011 at 6:56 pm #343716
    ipoole
    Participant

    Re: Hotpoint WF321P

    Thanks for the replies – so a new dispensor assembly it is then – Ian

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.