Hotpoint WF340 Error codes?

[Allsorts]

Does anyone have a list of the error codes for this machine please…. it would be most helpfull.

Currently I have one that buttons 3&4 which are “rinse hold” and “mini load” lights are flashing together with the power light and the pump starts going and wont stop.

[helo_75]

3 & 4 if f03

that being an ntc fault

if you’re very lucky it could just be the ntc (in the heater), or even a broken wire…

sadly these machines are the usual indesit tat, and are renowened for their unreliable electronics…

be prepared to have a pcb and eprom fitted

[Author]

Posts