Hotpoint WF541

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WF541

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 25, 2010 at 4:36 pm #58282
    jackster
    Participant

    Hi all, I have got this appliance flashing a no drain fault, no blockages anywere and pump doesnt run, I changed the pump for one on van but still the same? Pressure switch clear and ok, pump is getting 180v to it so im assuming board is faulty? I have checked connections etc.

    October 25, 2010 at 6:11 pm #333982
    maltheviking
    Participant

    Re: Hotpoint WF541

    Pumps are 240v so your 180v supply is at question

    October 25, 2010 at 6:38 pm #333983
    jackster
    Participant

    Re: Hotpoint WF541

    So is that a board fault? I have got the 180V to the pump and 240 to board?

    October 25, 2010 at 7:14 pm #333984
    maltheviking
    Participant

    Re: Hotpoint WF541

    Boards on these are a bit of a PITA Send it off to EMW for test/repair if you don’t wan’t to buy a board.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.