Hotpoint WF630

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WF630

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 4, 2011 at 12:29 pm #63736
    dawesdomestics
    Participant

    Hi Guys
    wonder if anyone can help,i was called to a Hotpoint WF630,customer said was just displaying TEST on display panel,i traced the fault to a blocked drain pump and now whichever programme i choose it lights led`s in sequence and goes onto a final spin,whilst still displaying TEST. Is there a reset sequence on this machine as everything seems ok now ? Thanks

    July 4, 2011 at 12:48 pm #354702
    don
    Moderator

    Re: Hotpoint WF630

    Hi

    Well documented in the forums by using the advanced search 😉 Here you go.

    Don

    July 4, 2011 at 12:54 pm #354703
    Bernie
    Participant

    Hotpoint WF630

    I dont know if this would help have a look here
    viewtopic.php?f=3&t=12044

    July 4, 2011 at 1:06 pm #354704
    don
    Moderator

    Re: Hotpoint WF630

    Deleted the duplicate thread and added bernie’s post to the original one started.

    Causes less confusion if it’s kept to one thread.

    Don

    July 4, 2011 at 1:13 pm #354705
    dawesdomestics
    Participant

    Re: Hotpoint WF630

    Thanks Guys, I`ll go and have a press.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.