Hotpoint WF860F Ultima no motor action

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WF860F Ultima no motor action

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 26, 2011 at 9:15 am #65882
    Bernie
    Participant

    Hotpoint WF860F Ultima no motor action
    Have checked PCB for dry joints etc all ok, also tighten all connection to PCB. This machine has a brushless motor did check motor windings all tested ok, motor plug ok
    Any suggestions what else I might try.
    Thanks for looking
    Bernie

    October 26, 2011 at 10:00 am #362251
    iadom
    Moderator

    Re: Hotpoint WF860F Ultima no motor action

    Bernie wrote:
    Any suggestions what else I might try.

    Module to EMW for test/repair.

    October 26, 2011 at 1:16 pm #362252
    DDSDDS
    Participant

    Re: Hotpoint WF860F Ultima no motor action

    modules by the dozen

    November 2, 2011 at 8:33 am #362253
    Bernie
    Participant

    Re: Hotpoint WF860F Ultima no motor action

    I did wonder if it might be that,
    Thanks for confirming it.
    Bernie

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.