Hotpoint WM series

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WM series

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 20, 2006 at 10:44 pm #15000
    neptune
    Participant

    Over the years I have had many instances of customers complaing that the machine stops during the rinse part of the cycle . In many cases the only thing I could find was worn out motor brushes . Replacing the brushes cured the fault . This has happened too often to be a coincidence. What I would like to know is WHY?

    January 20, 2006 at 11:48 pm #161653
    Penguin45
    Participant

    Re: Hotpoint WM series

    The computer side of things will only make a finite number of attempts to run the motor before giving up. I find the dial usually gets to just before the end of the ash on cottons.

    Chris.

    January 21, 2006 at 1:18 am #161654
    leavemetogetonwithit
    Participant

    Re: Hotpoint WM series

    Penguin45 wrote: I find the dial usually gets to just before the end of the ash on cottons.

    Chris.

    So this normally occurs only in smoking households?

    I’ll get my coat.
    Mike

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.