Hotpoint WMA 10

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WMA 10

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 30, 2013 at 10:56 am #76904
    Geoff1312
    Participant

    Hi Guys,

    Machie washes heats etc. Drains at end of wash then prog end light comes on and machine stops i.e. no rinse etc. If put on rinses programme all ok. Any ideas please? I suspect PCB

    Thanks in advance
    Geoff

    August 30, 2013 at 2:21 pm #400135
    iadom
    Moderator

    Re: Hotpoint WMA 10

    PM me an e mail address and I will send you the manual, it has some basic test routines in it.

    Jim.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.