Hotpoint WMA 32

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WMA 32

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 22, 2004 at 9:04 pm #6883
    cornflakes
    Participant

    call late this evening

    WMA 32 just after final rinse..flashing light( rinse) and then begins to fill again..water as high as soap dish and beyond

    when re-set as per manual – part empties and starts re-filling again

    I suspect drain pump or filter blockage..any ideas before I take the goldfish round.

    many thanks

    Graham
    Cornnflakes

    November 22, 2004 at 9:10 pm #120113
    Penguin45
    Participant

    Pressure switch hose chafed through is always an entertaining one……..

    Chris.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.