hotpoint wma 52 bearings

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint wma 52 bearings

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 27, 2010 at 11:50 am #57518
    clockworkone
    Participant

    hi can anyone tell me will i be able to remove front of m/c and just front of drum to do bearings on this model. obviously will still have to access back.customer not keen on spending too much on it due to age. also 30 or 35mm.thanks in advance.paul

    September 27, 2010 at 11:54 am #331391
    Allsorts
    Participant

    Re: hotpoint wma 52 bearings

    Sorry.. This is a Drum out (Split drum) Job 35mm bearings

    September 27, 2010 at 12:38 pm #331392
    clockworkone
    Participant

    Re: hotpoint wma 52 bearings

    thanks allsorts, guess its one for recycling.when enroute to a job tomorrow will have a quick look just in case it motor bearing.thanks again.paul

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.