hotpoint wma type wont start

[delta01]

hi
never had this one b4 just wont start i visually checked panel for damage but non found, start switch is ok door lock ok any suggestions appreciated

[timdowning]

Re: hotpoint wma type wont start

To eliminate door hook / handle or spring issues push the door lock across with a volt stick or something similar.

If it starts then issues with door parts. If not and the door lock and wiring is ok then module fault.

[iadom]

Re: hotpoint wma type wont start

Moved to correct forum.

It is a fairly common PCB fault TBH.

[delta01]

Re: hotpoint wma type wont start

Thanks i suspected board just wondered if anyone knew pos fault on board and how to repair

john

[iadom]

Re: hotpoint wma type wont start

Not sure myself, did one only yesterday,there is no obvious signs of any component or track failure on the board, I always change the doorlock whenever I get this fault.

Jim.

[Author]

Posts