Hotpoint WMA13 Module

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WMA13 Module

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 20, 2007 at 8:55 pm #26779
    Phidom
    Participant

    I need a module for this machine but I’ve got a module off a WMA22. Both are listed as part No. 1603557 but I don’t suppose I can get away with fitting the WMA22 board in the WMA13 machine? 😕

    April 20, 2007 at 9:35 pm #211352
    helo_75
    Participant

    Re: Hotpoint WMA13 Module

    u could, but youd need to recode it

    im sure someone here has the codes

    April 21, 2007 at 4:11 pm #211353
    iadom
    Moderator

    Re: Hotpoint WMA13 Module

    WMA13 configuration.
    Main switch OFF.
    Press & Hold Option buttons 1&2 whilst selecting K on programme dial, hold for five seconds.
    Options 1&2 now flashing.
    Press Start/Reset button for 2 seconds.
    All neons OFF.

    Switch knob to 1st code Prog D, press Start/Reset briefly. Rinse hold lights up.

    2nd code D press Start/Reset again, Energy Saver lights up.

    3rd code, turn to B, press Start/Reset, Rinse Hold & Energy Saver on.

    4th code turn to A, press Start/Reset Energy Save lights up, Rinse Hold flashes.
    Rotate the control knob anti clockwise back to OFF.

    Job done.

    Jim.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.