Hotpoint WMA35 1st & 3rd led’s flashing

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WMA35 1st & 3rd led’s flashing

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 20, 2007 at 7:11 pm #30705
    Bernie
    Participant

    Have Hotpoint WMA35 with the 1st (door locked) & 3rd (wash) led’s flashing
    I have the UK Whitegoods fault code guide but cannot find it in there also have tried to find it in the forums but no luck
    Can anybody help please?

    Bernie

    September 21, 2007 at 10:37 am #228112
    Seamy
    Participant

    Re: Hotpoint WMA35 1st & 3rd led’s flashing

    Failure to empty in alloted time.

    I’d be looking at blocked filter, sump hose blockage or pump failure.

    September 22, 2007 at 9:32 am #228113
    Bernie
    Participant

    Re: Hotpoint WMA35 1st & 3rd led’s flashing

    I have found that the armature had shorted out blowing the module.
    Had a second hand module and motor, works ok now.

    Thanks for the help

    Bernie

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.