- This topic has 1 reply, 2 voices, and was last updated 17 years, 8 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
the wiring on my wma63 has chaffed through to the copper where it is (Ridiculously) attached by a cable tie to the drum casing (8 wires are affected to varying degrees).
Any idea where I can get a new wiring loom? I don’t want to leave insulating tape on for too long.
Thanks in advance for any advice
hotpointlessRe: hotpoint wma63 wiring
The 10 cable harness that goes from the power PCB near the top of the machine down to the DC chopper board which is situated on the chassis, front right is part number 1603766. The 7 cable harness from the DC chopper board to the motor is 1603764.
An e-mail to spares@ukwhitegoods.co.uk should get you price and delivery details.
Jim.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.