Hotpoint WMF740 F02 fault.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WMF740 F02 fault.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 17, 2013 at 8:10 am #75872
    aqualectric
    Participant

    Hotpoint WMF740 – shows a F02 – motor fault. Motor meggers OK, tacho generates when motor is spun. Motor brushes looked fine so I checked everything else in the machine. Machine works perfectly but waits until I leave – then F02. Changed PCB; still F02. It has to be the motor…..? 😕

    Any help please!!

    Steve.

    June 17, 2013 at 8:27 am #396444
    iadom
    Moderator

    Re: Hotpoint WMF740 F02 fault.

    Possibly worth trying the brushes Steve, other than that then your sig says it all. 😥

    June 17, 2013 at 9:26 am #396445
    aqualectric
    Participant

    Re: Hotpoint WMF740 F02 fault.

    Thanks for the response Jim!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.