hotpoint wmpf742puk washer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint wmpf742puk washer

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 25, 2018 at 1:02 pm #94907
    tash
    Participant

    hi been to this washer door won’t release unless manual release is used came up f06 which understood to be lock. ordered new lock c00254755 and this one just won’t lock at all. no noise just lock light flashing. i guess it could be a faulty new switch any other ideas. cheers

    October 25, 2018 at 4:06 pm #458721
    murv
    Participant

    Check the door lock wiring back to the pcb, if okay it sounds like the pcb is at fault.

    October 25, 2018 at 4:51 pm #458722
    tash
    Participant

    yes did do . all ok. weird how new sw won’t work at all though. thanks anyway

    October 25, 2018 at 5:21 pm #458723
    murv
    Participant

    New lock is supplied unlocked /open and no impulse from module to lock it so machine will not run.
    Old lock did not unlock at end of program so it is already closed/locked and the machine will work.
    Sounds like no impules are arriving from module to change the state of the door lock.

    October 26, 2018 at 11:16 am #458724
    tash
    Participant

    ok makes sense thanks

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.