hotpoint WT 540

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint WT 540

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 6, 2009 at 6:34 pm #49131
    knobs
    Participant

    Had this fault on a couple of these this week,can any one help ?
    As soon as the machine is plugged in all the lights start flashing.
    pull the plug out and they still flash for about 15 secs,then gradually fade out.
    cannot programme anything on the machine[/img]

    October 6, 2009 at 6:52 pm #298840
    iadom
    Moderator

    Re: hotpoint WT 540

    Classic board fault, EMW is your friend. 😉

    October 6, 2009 at 6:53 pm #298841
    knobs
    Participant

    thought so,many thanks

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.