hotpoint wt540 error codes

This topic has 1 reply, 2 voices, and was last updated 16 years, 11 months ago by chitts.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
April 30, 2009 at 11:57 pm #45372

chitts
Participant

All lights flash fast but dimly then suddenly machine starts to fill. Any clues

May 1, 2009 at 10:03 am #285483

iadom
Moderator

Re: hotpoint wt540 error codes

Sounds like main board failure, again. 😥

Make sure that all of the push buttons are free. If these get gummed up due to spillage then it can cause the controls to play up.

Jim.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.