hotpoint wt961 d in display

[delta01]

hi i went to this machine today and managed to re set it by unplugging it, it seems ok just wondered why it did it and is that the normal procedure for re setting

thanks John

[Martin]

Re: hotpoint wt961 d in display

Quickest 45 quid earned today. 😉

[iadom]

Re: hotpoint wt961 d in display

There have been 3 versions of Demo Mode used on these appliances:
Version 1 (Production – Date Code 39 March 2005)
To Activate
1. From the default screen of a programme after switching the appliance on press both ’Start /
Cancel’ and ’On / Off’ buttons together until ’d ON’ appears in display.
2. Press the ’Start / Cancel’ button only and ’t ES t’ appears in the screen. (Temp and Spin symbols also appear.)
To Deactivate
Press the ’Start / Cancel’ button until ALL the console LEDs illuminate.
Press both ’Start / Cancel’ and ’On / Off’ buttons together until ’d OFF’ appears.
The default screen returns and you can select a new programme.
Note: – The default screen information displayed on these models is that of the programme currently selected by the selector knob.
Version 2 (during Date Code 39 March 2005 – to Date Code 42 June 2005)
To Activate
1. Same method as Version 1.
To Deactivate
1. Simply press the cancel button and the appliance returns to default
Version 3 (During Date Code 43 July 2005 – to date)
To Activate
1. Press ’On / Off’ and ’Start / Cancel’ together with the top left option button until ’d On’ appears.
To Deactivate
1. Press ’On / Off’ and ’Start / Cancel’ together with the top left option button until ’d OF’ appears.

[delta01]

Re: hotpoint wt961 d in display

thanks guys

[Author]

Posts