How to remove front panel on Whirlpool S22DDSS23-A/G?

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › How to remove front panel on Whirlpool S22DDSS23-A/G?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 16, 2009 at 10:19 am #46420
    ron5
    Participant

    Hi I have a Whirlpool S22DDSS23-A/G (858616015000) F/F with a constantly clicking and flashing front control panel.
    Reading the forum it looks like this could either be the front or rear pcb.
    How do I remove the front panel to check/change the front board?

    Also it looks like the new part is now supplied with just the pcb and not the front panel as previously. The ice flap no longer fully closes properly is there a part than commonly wears/breaks to cause this?

    Thanks.

    June 16, 2009 at 12:33 pm #289269
    boyse7en
    Participant

    Re: How to remove front panel on Whirlpool S22DDSS23-A/G?

    To remove the front panel, should just need to remove the drip tray and underneath are two screws. remove these and lift the panel up slightly and it will come loose.

    June 16, 2009 at 5:29 pm #289270
    ron5
    Participant

    Re: How to remove front panel on Whirlpool S22DDSS23-A/G?

    Thanks, but I removed the drip tray and there are no screws underneath?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.