Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Howdens hja8703 Dryer problem
- This topic has 5 replies, 4 voices, and was last updated 14 years, 2 months ago by
folleyball.
-
AuthorPosts
-
February 1, 2012 at 6:35 pm #67693
folleyball
ParticipantHi Guys
Having all sorts of problems with these machines.
Got a landlord with 6 of these models and the dryers are doing my head in.
I’ve changed the resettable stats, the temperature sensor, i’ve cleared the condenser unit and checked the heater boxes for blockages but still the buttons keep popping up on the stats.
Anybody else had any problems with these lovely Candy machines?February 1, 2012 at 8:28 pm #368207BobHope
ParticipantRe: Howdens hja8703 Dryer problem
have followed the tech bull upgrade for the cut outs and NTC. what part number was the cut outs?.
Bob
February 2, 2012 at 1:03 pm #368208folleyball
ParticipantRe: Howdens hja8703 Dryer problem
Hi Bob
The part number I have is 41024208
I did read they have increased the max temperature on these cut outs.
February 2, 2012 at 1:08 pm #368209BobHope
ParticipantRe: Howdens hja8703 Dryer problem
that part number is the new cut outs, but replace the NTC probe for drying P/N. 41013142 as well.
Bob
June 20, 2012 at 7:49 am #368210Pigpen4
ParticipantRe: Howdens hja8703 Dryer problem
Letting agents called me out to one of these to quote for a new dryer motor. Apparently previous engineer tolsd them they needed one.
Upon investigation I found the dryer motor is fine, but it needs a new dryer fan and fan housing, as somethings been stuck in there and rather chewed it up.
But tenant told me they have previously had an engineer out to it every 2 or 3 months, who would just reset the stats on the top and wait for the next callout.
So could someone send me some tech info on this machine, please, including any relevant tech bulletins?
And also can somebody supply me with the part numbers for the fan and fan box?, since I’ve been trying for over 2 years to get access to GIASTech, but because I’m a sole trader independent who can’t guarantee I’ll be spending £3000+ per year with them, they don’t seem to want to know!
Thanks,
Pigpen.June 20, 2012 at 9:05 am #368211bazza500
ParticipantRe: Howdens hja8703 Dryer problem
I’ve got one doing the same.
I have now replaced NTC, resettable stats, Fan, Fan housing and fan motor and the bloody thing is still tripping.
kindling and petrol is the next step..
-
AuthorPosts
- You must be logged in to reply to this topic.
