HP and Creda part numbers Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › HP and Creda part numbers This topic has 9 replies, 3 voices, and was last updated 16 years, 4 months ago by DDDave. Viewing 10 posts - 1 through 10 (of 10 total) Author Posts November 16, 2009 at 9:07 pm #50196 DDDaveParticipant Can anyone help me with two part numbers please. 1- Rubber door seal for Creda dryer 37761 2- Timer knob/dial for HP VTD20 dryer. Thank you. Dave November 16, 2009 at 9:17 pm #303927 geoff1Participant Re: HP and Creda part numbers Hi Door seal for 37761 c00095978 timer knob for vtd20 c00207479 (white in colour) Geoff November 16, 2009 at 11:23 pm #303928 DDDaveParticipant Re: HP and Creda part numbers geoff1 wrote:Hi Door seal for 37761 c00095978 timer knob for vtd20 c00207479 (white in colour) Geoff Thats great Geoff, thank you very much. Main agents couldnt give me those numbers !!! Dave November 17, 2009 at 11:57 pm #303929 DDDaveParticipant Re: HP and Creda part numbers The part number for the dial didnt work out Geoff. I need the lower dial. The upper one is c00207479. Any ideas please ?? November 18, 2009 at 12:09 am #303930 iadomModerator Re: HP and Creda part numbers C00207479 is the correct part according to Partfinder. Either that is wrong or you have been sent the wrong one. 😥 November 18, 2009 at 7:34 am #303931 DDDaveParticipant Re: HP and Creda part numbers It came out of a sealed packet. November 18, 2009 at 10:07 am #303932 iadomModerator Re: HP and Creda part numbers I’ve checked the part number elsewhere and it appears to be correct. Not the first time wrong parts have been bagged up though. 😥 November 18, 2009 at 1:42 pm #303933 DDDaveParticipant Re: HP and Creda part numbers iadom wrote:I’ve checked the part number elsewhere and it appears to be correct. Not the first time wrong parts have been bagged up though. 😥 I`ll try it again so. Thanks dave November 18, 2009 at 1:45 pm #303934 geoff1Participant Re: HP and Creda part numbers Hi Checked the part number on the connect site and the picture that came up is the one that you are looking for. I would suggest that some one has it bagged wrong Geoff November 18, 2009 at 1:50 pm #303935 DDDaveParticipant Re: HP and Creda part numbers geoff1 wrote:Hi Checked the part number on the connect site and the picture that came up is the one that you are looking for. I would suggest that some one has it bagged wrong Geoff Thanks for all the help guys. I will reorder it today. Author Posts Viewing 10 posts - 1 through 10 (of 10 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In