hp wml540

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hp wml540

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • August 4, 2010 at 9:44 am #56282
    dopper
    Participant

    door lock not locking read here that could be motor? whats the fualt on the motor to make locks go?
    dop

    August 4, 2010 at 12:50 pm #326802
    Martin
    Participant

    Re: hp wml540

    Do what dop?

    It’s usually the Door Interlock blows up the module as far as I recall. Time to take a look at the module rather than the motor methinks.

    August 4, 2010 at 1:03 pm #326803
    DDSDDS
    Participant

    Re: hp wml540

    no dop is right i have had several of these where the door does its clicky thing and it turns out ot be wiring to motor loose or broken

    August 4, 2010 at 10:19 pm #326804
    iadom
    Moderator

    Re: hp wml540

    Last one I had was a duff PCB, quite common, ask Tony at EMW. 😉

    August 5, 2010 at 7:15 am #326805
    lerch
    Participant

    Re: hp wml540

    I have found that 99 times out of 100 its the wiring to motor that causes the lock to keep clicking trying to lock.

    August 7, 2010 at 8:36 am #326806
    dopper
    Participant

    Re: hp wml540

    cheers looks like it was just door lock on this one hear they are crap!

    August 7, 2010 at 10:14 am #326807
    lerch
    Participant

    Re: hp wml540

    Hope you are right but……..

    Hate to say but I think you will be back never had one that was just the door lock and been to more than I can remember.

    August 7, 2010 at 2:06 pm #326808
    helo_75
    Participant

    agreed, its seems a common problem

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.