Hygena APL8224/1. Programmer not moving on

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Hygena APL8224/1. Programmer not moving on

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 29, 2013 at 7:10 pm #73839
    chrisb1309
    Participant

    This machine is in a rental property we have and had been working well.
    I have cleaned everything out,matrix,pumps,hosesetc and all is clean.
    The machine performs all functions but only when the prog.dial is rotated manually. I have checked the wiring loom at hinge point and all appears well. Element and thermostat both have been checked with meter.
    Is there anything I may have missed or can it only remain to change the programmer unit? Although the machine is of an age am loathe to bin it as it is in good shape but for not actually working!

    Any ideas?
    Thanks in anticipation
    Chris

    January 30, 2013 at 8:58 am #388945
    nigegt
    Participant

    Re: Hygena APL8224/1. Programmer not moving on

    Check for a circuit through the timer motor. It sounds like thats your problem. If it’s o/c then order new timer

    January 30, 2013 at 4:00 pm #388946
    chrisb1309
    Participant

    Re: Hygena APL8224/1. Programmer not moving on

    Thanks for that. I have ordered a new timer
    Chris

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.