Hygena/diplomat cooker hood – motor replacement…

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hygena/diplomat cooker hood – motor replacement…

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 6, 2012 at 12:10 pm #70333
    neon_3SP_glow
    Participant

    Hello guys and girls.

    Hygena Cooker Hood
    Model : ADP2440
    S/N : 2405030783

    Is replacing the motor in these a tricky job? Up until now i have only ever needed to carry out repairs on the control board and the lamp holders. Only this time we have 240V going to the motor, which refuses to play ball 🙁

    Thanks for any advice in advance 😉

    July 7, 2012 at 9:10 am #377820
    electrofix
    Moderator

    Re: Hygena/diplomat cooker hood – motor replacement…

    I am getting ADP2440 as a dishwasher

    Dave

    July 8, 2012 at 8:21 am #377821
    Dales-Electronic
    Moderator

    Re: Hygena/diplomat cooker hood – motor replacement…

    Rather depends on whether the motor mounting bolts are accessable from inside or if they are in the chimney. If the latter then you have the chimney to take off (if you’re lucky) or the whole unit down from the wall

    Ian

    July 11, 2012 at 10:17 am #377822
    neon_3SP_glow
    Participant

    Re: Hygena/diplomat cooker hood – motor replacement…

    hey thanks for the reply, have ordered the motor…

    /gasp!

    thanks again

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.