Ideal gas hob ignitor replacement

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Ideal gas hob ignitor replacement

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 26, 2007 at 9:49 am #24512
    DeeBee
    Participant

    I have a Hygena natural gas hob (Model AHY 1120) which is about 15 years old. Although the hob says Hygena, the manual is for an Ideal hob (model APL11??). The hob is working fine but the ceramic on the ignitor terminals is gradually breaking off. This in no way affects the ignition efficiency but I am interested in replacing them before it does. Are these readily available and is it a DIY job ? Can they be replaced from the top of the hob e.g. by simply unscrewing ?

    many thanks in advance.

    January 26, 2007 at 12:09 pm #202352
    Dave_Conway
    Participant

    Re: Ideal gas hob ignitor replacement

    They’re quite reasonable to buy but this model has to be uninstalled to do any work on it so you will need an engineer (Corgi registered) for this job.

    You should be able to find one from the repairs@ link below 🙂

    The electrode is here:

    http://www.ukwhitegoods.co.uk/modules.p … cts_id=707

    Dave.

    January 26, 2007 at 12:26 pm #202353
    admin
    Keymaster

    Re: Ideal gas hob ignitor replacement

    hi all

    box of matches would be a better option..lol

    bryan

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.