Ignis ADL334 Dishwasher

[andy2]

Hi – any info would be helpful. Have not seen machine yet but the customer says the Start button light is flashing and machine won’t start.
I can’t find anything in the error codes on these.

Andy 😀

[aqualectric]

Re: Ignis ADL334 Dishwasher

It’s a Whirlpool machine. Press and hold the start button for 3 seconds to reset, switch off and on again and try to select a programme.

Hope that helps,

Steve.

[Penguin45]

Re: Ignis ADL334 Dishwasher

If it faults, count the flashes – that’s your error code. Info on p2 of Error Codes thread.

Chris.

[andy2]

Re: Ignis ADL334 Dishwasher

OK

Don’t actually know what was wrong but i reset it by holding the button and it is now OK. Thanks very much for the help gentlemen – much appreciated.

Andy 😀 😀 😀

[gegsy]

Re: Ignis ADL334 Dishwasher

It will fault again 😉 you have only cancelled programme.

Greg

[Author]

Posts