Ignis integ. WD – E14

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Ignis integ. WD – E14

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • January 24, 2012 at 10:09 am #67532
    Goatboy
    Participant

    Morning 🙂

    Goatboy senior is having problems with a Ignis integrated WD. He says it randomly comes up with E14, and locks the user out. Somes on rinse, sometimes when it’s spinning. Seems random.

    The fault code bible says F14 on a Whirlpool washer is eeprom (control unit). Do we think E14 on an Ignis WD is the same?

    I tried to get more info out of him, but he was half out the door and shouting “Just find out what it is!!!”

    Do we need more info?

    January 24, 2012 at 11:23 am #367736
    iadom
    Moderator

    Re: Ignis integ. WD – E14

    Goatboy wrote:

    Do we need more info?

    If you were a member of the public Paul we would point you in THIS direction. :mrgreen:

    Jim.

    January 24, 2012 at 2:29 pm #367737
    Goatboy
    Participant

    Re: Ignis integ. WD – E14

    Silly me :boops:

    AWF592

    January 25, 2012 at 9:43 am #367738
    Goatboy
    Participant

    Re: Ignis integ. WD – E14

    Is there a test procedure for this model?

    ÃŒt seems like the Ignis ‘E’ error codes are different from the Whirlpool ‘F’ error codes 😕

    January 25, 2012 at 10:33 am #367739
    iadom
    Moderator

    Re: Ignis integ. WD – E14

    Not a Whirlpool expert but if it is a badged Whirlpool is there not a 12NC number on it, that might help the Whirlpool aficionados to give you some help.

    January 25, 2012 at 1:15 pm #367740
    Goatboy
    Participant

    Re: Ignis integ. WD – E14

    851959215002

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.