- This topic has 1 reply, 1 voice, and was last updated 17 years, 6 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Called to above today for drying fault. When selector is set to dry it advances to stop after 10/12 seconds and door neon blinks not giving a fault code. The heater reads 43ohms and the NTC reads 23.44 kohms. The door locks and the thermal cutouts are ok. Any help appreciated guys.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.