Indesit ide 1000 error messages

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Indesit ide 1000 error messages

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • December 29, 2005 at 7:51 pm #14372
    gullane1
    Participant

    My Indesit IDE 1000 is flashing up an error message of A10 after a few minutes of operation. This code is not detailed in the troubleshooter guide. Any ideas?

    December 29, 2005 at 8:38 pm #159192
    iadom
    Moderator

    Re: Indesit ide 1000 error messages

    A10 indicates a ‘no heat’ fault.

    December 29, 2005 at 8:38 pm #159193
    Dave_Conway
    Participant

    Re: Indesit ide 1000 error messages

    It means there’s a problem with “no heat”.

    Possibly the heater, thermostat or electronics problems.

    One for an engineer to be honest, check the repairs@ link below 😀

    Dave.

    December 29, 2005 at 8:39 pm #159194
    Dave_Conway
    Participant

    Re: Indesit ide 1000 error messages

    :wave: 😆

    December 29, 2005 at 8:42 pm #159195
    iadom
    Moderator

    Re: Indesit ide 1000 error messages

    Dave, you must have read the washer codes instead of the dishwasher codes like me. DOH.
    A10 on later dishwashers is no heat. Needs attention by someone with suitable electrical test equipment.

    I did a sneaky edit on my first post. 😳

    December 29, 2005 at 8:47 pm #159196
    Dave_Conway
    Participant

    Re: Indesit ide 1000 error messages

    Oops 😉

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.