Indesit IDS 105 (slimline) not completing cycles

[happyhacker]

After a Power board trip (which we think was caused by the machine) we found it sitting there with the Drying and Start/Pause lights flashing and quietly moaning to itself. Stopped it and did a wash. Fills OK but does not complete the next stage. In fact for a normal wash it just keeps churning on for hours. It empties OK when starting a program and fills so not blockages anywhere. About 3years old.

Advice welcome.

Thanks for your time.

[iadom]

Re: Indesit IDS 105 (slimline) not completing cycles

happyhacker wrote: About 3years old.

Already past it’s use by date. :rolls:

So many weak areas, it could be heater, main pcb, broken wiring in door etc.

All known failure points along with lots of main circulation pump failures. 🙁

A test of the heating element with the mains plug removed would be the first thing to check.

[Author]

Posts