- This topic has 1 reply, 1 voice, and was last updated 10 months, 3 weeks ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
went out and left the wash on, came back to all the lights on the front flashing together.
looked up what the cause could be so I cleared the filter and drained the waste hose and cleared with hosepipe, tried leaving it unplugged for an hour or so to reset.
now when I try a wash it starts to fill as normal this should be followed by the drum turning about 20 secs later but nothing. The filling will stop after about 20 secs as normal and if I just leave it the filling will start up again as if it was a normal cycle. It’s as if the motor or the power to the motor isn’t there, not even as much as a beep or a click. Anybody experienced this before?
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.