Indesit IWDC6125

[johnny_9k]

My Indesit IWDC6125 won’t spin.

It drains, but won’t spin. I’ve tried it on a few different cycles and it fails on the spin cycle but works fine on the drain cycle.

The brushes have loads left, there is nothing obviously blown on the PCB.

IIRC all five horizontal lights were flashing on the top, first 4 (from left to right) were flasshing green and the far right (i.e. power) was flashing orange.

I’ve put it back on spin and will confirm the lights when it’s finished.

IIRC all vertical lights were not flashing but the spin cycle light was illuminted, but again I will confirm once it fails.

[johnny_9k]

Re: Indesit IWDC6125

It’s working again now.

Will see how I get one, Do these have out of balance sensors? I may have reset it by tilting it to look at the circuit board.

[Author]

Posts