Indesit IWDE12 uk scraping at back of drum.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit IWDE12 uk scraping at back of drum.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 27, 2011 at 2:34 pm #65911
    allan73
    Participant

    Hi all,
    Something seems to be scraping at the back of the drum on the above m/c. I’ve taken all the drum lifters out and had a good look in but to no avail. 😥
    The sound seems to come from where the condensor assy meets the inner drum, are there any known issues with bits coming loose at this point ?

    Thanks for any help,
    Allan.

    October 27, 2011 at 2:56 pm #362357
    Martin114
    Participant

    Re: Indesit IWDE12 uk scraping at back of drum.

    Its probably the lint filter thats bent and catching the inner drum. Best to take the steam condenser off and have a look.
    Martin.

    October 27, 2011 at 4:52 pm #362358
    allan73
    Participant

    Re: Indesit IWDE12 uk scraping at back of drum.

    Thanks Martin, I think your right, I forgot to mention there was a fragment of perferated stainless steel between the drums.
    By the way could you tell me what angle the locking tabs for the drum lifters should be at on these ?

    Thanks,
    Allan.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.