Indes*it IWME126

[Steve_kent]

Hi all, firstly brilliant site have been lurking since yesterday when the washing machine went up the wall.

I believe I have an f05 fault (2 and 4 buttons flashing also the red lock button)

So far I have cleaned the hose, U bend, filter etc and have now cleared the pressure switch tube(can not get to the the other end near the drum even with the machine on its side) I can hear the adudible click on the pressure sw, have a reading of 2mv on pins 12 (far left) and 11 (middle of the 3pins grouped together) I do not have any continuity or ohms on any other pins.

I am unsure what else to test for on the pressure sw to confirm it works correctly.

Can anyone assist me further in diagnosing the fault with my machine please I would be very greatful.

Thanks in advance

[Steve_kent]

Re: Indes*it IWME126

Up and running. Please close this post ty

Some very hot water down the pressure sw tube seem to have fixed the error.

[Author]

Posts