indesit wd12x door Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › indesit wd12x door This topic has 4 replies, 3 voices, and was last updated 17 years, 11 months ago by cornflakes. Viewing 5 posts - 1 through 5 (of 5 total) Author Posts April 29, 2008 at 2:07 pm #36380 cornflakesParticipant called to fit new door latch and spring to this appliance, client had took a part a diy project…and left what a frustrating job,which way does the bloody spring fit and is pecker under tension???? theres no such job as a 5 min one graham April 30, 2008 at 10:19 am #250809 iadomModerator Re: indesit wd12x door Latch is sprung loaded, a bit of a pain to fit even when you have taken the old one off yourself. Will e-mail you a picture, it might help. Jim. March 11, 2010 at 1:01 am #250810 bmrenrParticipant Re: indesit wd12x door Hi Jim could you email me this picture as I am going to one on friday Tom. March 11, 2010 at 11:02 am #250811 iadomModerator Re: indesit wd12x door Done. March 11, 2010 at 11:35 am #250812 bmrenrParticipant Re: indesit wd12x door cheers Jim Author Posts Viewing 5 posts - 1 through 5 (of 5 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In