Indesit WDE12UK help?

[Martin]

On the dry cycle the valve and the pump are not energised for some reason? No error message or codes come up, it just operates through a drying cycle without either the valve or pump operating for some reason?

Now the condenser valve is fine and so is the pump. The wash cycles behaves without any problems. It does all it is supposed to do. I have inspected the module and tweaked all the connectors to it, all seems in order?

I reckon the module can be the only culprit here but can anyone confirm for me please I wonder?

[phil59]

hi martin yes same problem a while ago main board fault cheers phil

[admin]

Martin, condenser valve come “ON” only after reaching drying temperaturebut pump must operate from begining. Please tell me if heater comes hot and fun goes?

[Martin]

baron wrote:Please tell me if heater comes hot and fun goes?

Oh yes sorry, forgot to say that the heater does come on and the fan. But no pump and no water (even though the temperature rises enough so the valve should be operating as well.

I’m not sure where the fun goes though? Indesit and fun somehow don’t go together…. :rolls:

[admin]

From my point I will do refresh the dump memory. I have had lot of Merloni with losing some bits on memory and //// stuck on different stages or not complete the job (“fun” is here).
I will look in scheme if depends also from other peripheral.

[Author]

Posts