INDESIT WIA101

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › INDESIT WIA101

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 31, 2007 at 4:59 pm #26276
    barryfast
    Participant

    Hi all the m/c will not start power to door switch bridge out door s/w but no life at all, module ❓ thank’s Barry

    March 31, 2007 at 5:40 pm #209513
    iadom
    Moderator

    Re: INDESIT WIA101

    According to EMW, this is becoming a common fault on these PCB’s 😥

    Jim.

    March 31, 2007 at 6:10 pm #209514
    Bryan
    Participant

    Re: INDESIT WIA101

    First thing I’d do on an Indesit machine with the door “locking on” but not doing anything else is check the brushes :idea:. Had 2 this week which was very nice work for a change :).

    Bryan

    March 31, 2007 at 6:18 pm #209515
    iadom
    Moderator

    Re: INDESIT WIA101

    Spot on Bryan,

    from the known error codes thread, page #4

    Faults without error codes. If the motor is O/C the machine will not fill or operate.

    Jim.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.