indesit wib111

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › indesit wib111

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 21, 2011 at 6:55 pm #61793
    scoobya1
    Participant

    door locks but door lock light just keeps flashing and machine won’t power down.Board?

    March 21, 2011 at 7:10 pm #347642
    iadom
    Moderator

    Re: indesit wib111

    After checking motor brushes and meggering motor & heater the PCB is the next likely candidate. 😥

    March 21, 2011 at 9:09 pm #347643
    Allsorts
    Participant

    Re: indesit wib111

    Also check the connection blocks for oxi… I had one doing this a few weeks back.. The connections on the board were oxidized. A good clean-up lightly with wire wool did the job.

    George

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.