Indesit WIDL 126 S – flashing LEDs – help please

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Indesit WIDL 126 S – flashing LEDs – help please

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 14, 2009 at 8:50 am #48571
    daniel_wilson
    Participant

    I have an Indesit WIDL 126S. Yesterday put it on. It went throught the wash cycle and drained then stopped with the following error lights:

    Start/stop – flashing rapidly

    Delay timer and Easy Iron (the first two buttons) flashing continuously but slower than the red one.

    The manual doesn’t say what the fault codes mean or how to fix it and I can’t see that this combination of faults has been answered here already.

    The machine is about 5/6 years old so out of warranty.

    September 15, 2009 at 10:33 pm #297003
    Penguin45
    Participant

    Re: Indesit WIDL 126 S – flashing LEDs – help please

    F12 – communications error – the pcbs are not talking to each other properly. May just be poor/oxidised connectors beyween the boards, entirely possible that the bottom board has failed.

    Power off if investigating this for yourself.

    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.