INDESIT WIDL102UK

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › INDESIT WIDL102UK

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 9, 2007 at 9:40 pm #23990
    mainman
    Participant

    CAN NOT RESET THIS WASHER DRYER
    WILL GO THROUGH THE CYCLE CORRECTLY FROM START TO FINISH.
    BUT IF YOU STOP IT BY RESETING AND TURN TO SPIN OR RINSE CYCLE ALL IT DOES IS FILL AND WASH.

    HAVE REPLACED THE PCB AND EPROM IC-TO NO AVAIL
    ANY IDEAS GUYS
    THANKS: RUSSELL

    January 10, 2007 at 12:51 am #200105
    Penguin45
    Participant

    Re: INDESIT WIDL102UK

    Hi Russell, welcome aboard – knock the caps off, will you?

    Conventional wisdom says:

    However…… If you’ve changed the board but kept the original eeprom the fault must lie there. Nothing else really, is there?

    Chris.

    January 10, 2007 at 8:30 pm #200106
    mainman
    Participant

    thanks for your reply chris
    but i changed the eprom as well
    the new pcb comes with the facility to plug in the new eprom.
    regards: russell

    January 11, 2007 at 5:58 pm #200107
    Tony_EMW
    Participant

    Re: INDESIT WIDL102UK

    This may well be dodgy buttons on the facia display. We repair them at £20 + vat. Also make sure edge connectors very tight on main board. Tony EMW 0115 9652118

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.