Indesit WIE127uk

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit WIE127uk

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 24, 2008 at 8:10 am #36249
    chichele
    Participant

    The appliance comes up with TEST in display
    and F-03
    So we tested ntc which is o/c and have ordered
    Can anyone advise do we have to clear the fault code after fitting the part and if so is there a proceedure for this
    Any help would be welcomed
    Regards Ian

    April 24, 2008 at 11:53 pm #250206
    Penguin45
    Participant

    Re: Indesit WIE127uk

    F03 shouldn’t need clearing if the substitution works. Wiring, heaters and PCBs play large with these machines though……

    Plenty of posts about TEST – use ‘Search’.

    Chris.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.