INDESIT WIE167 W/M

[mike412]

Evening All.

Got this job come in for next friday.
Customer says machine gets stuck at 1min remaining. Also says there was a flashing light but cant remember which one and its not flashing now.
I guess this is some sort of a” time out” fault but if anyone has any pearls of wisdom they would be much appreciated.
Thanks in Anticipation,
Mike.

I hope you have an enjoyable meeting, sorry I cant make it this year, perhaps next. (If membership continues to rise next years meeting might have to be at the new Wembley stadium-Thats if its finished.)

[Martin]

Re: INDESIT WIE167 W/M

mike412 wrote:I guess this is some sort of a” time out” fault but if anyone has any pearls of wisdom they would be much appreciated.

Most probably a drain/pump time-out fault I would think, or perhaps an out of balance load?

[mike412]

Re: INDESIT WIE167 W/M

Many Thanks Martin.
I hope to buy you a pint one day. (Wembley Perhaps).
Regards,
Mike.

[Martin]

Re: INDESIT WIE167 W/M

mike412 wrote:I hope to buy you a pint one day.

Nah! Just send me money instead :rotfl: Cheers!

[mike412]

Re: INDESIT WIE167 W/M

Evening All, I trust you have all had a prosperous day.

Customer has come back to me with a fault code, F07.
If this is the Evolution model, and I believe that it is, this indicates “Heater Relay Stuck”. Any ideas what we will be looking at here, ie new relay, new board, EMW, QER, BER?.
All contributions gratefully received.
Regards,
Mike.

[Dave_Conway]

Re: INDESIT WIE167 W/M

Probably the PCB, send it to EMW would be the best bet.

Check everything else first though, Indesit fault codes are notoriously unreliable 🙁

Dave.

[Author]

Posts