Indesit WIL 143s

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #60800
    A1TEC
    Participant

    Can anyone give me some pointers on the above machine, the machine goes through any program o.k but forgets to stop at the end of the spin 😕

    It looks like it is going to finish by slowing to distribute but picks up again and off it goes.


    Not had one do this before so any help appreciated.

    John.

    #343707

    Re: Indesit WIL 143s

    Get a board from EMW. Send it back if no cure.
    Mike.

    #343708
    gandh1
    Participant

    Re: Indesit WIL 143s

    if NFF then check interlock and impeded sump hose

    #343709
    A1TEC
    Participant

    Re: Indesit WIL 143s

    Thanks guys, was thinking it may be the board, but i will check the sump before i go and order a board.


    John.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.