Indesit WIXE127

[Mully]

Hi all,
Problems with the above m/c, when at end of prog, gets to 1 min and stays there.

if put on spin (10 min) does dist then 5 secs of spin then slows to about 100rpm then ramps upto spin speed for 20secs then pump turns off motor stops. followed by 8 mins of intermitant anticlockwise dist speed.

Display shows 1min for ever.

emw mod fitted recently

Checked htr/mtr for earth faults, non found, cbns ok.

Swopped mtr/htr for known good ones.

Any ideas?

John

[suedehead1]

Re: Indesit WIXE127

pressure switch or pcb?

[Mully]

Re: Indesit WIXE127

Thanks for the reply, I will try the p switch and let you know the outcome.

Thanks, John

[Author]

Posts