Indesit WIXL 163 suk pulses on fill etc

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries Indesit WIXL 163 suk pulses on fill etc

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #57533
    allan73
    Participant

    This Indes**t beast is starting ok then after a min or so door light goes off and it pulses. I’ve checked motor & motor plug, heater, ntc & tightened connections to main module & console pcb. Also checked for earth leaks all seems fine.
    I suspect main module, but am I missing something ?

    Allan

    #331434
    allan73
    Participant

    Re: Indesit WIXL 163 suk pulses on fill etc

    shall I phone EMW on this one ?

    #331435
    Allsorts
    Participant

    Re: Indesit WIXL 163 suk pulses on fill etc

    I had the same problem today on a (WIXL 143 suk).. Sometimes water inlet pulsing… Sometimes door lock going out and power loss to motor for a second or so during spin.

    Pretty sure it is power supply loss from board.

    Did you ever sort this?

    George

    #331436
    allan73
    Participant

    Re: Indesit WIXL 163 suk pulses on fill etc

    Emw didn’t have a board in so I directed customer back to Indesit under 5yr parts warranty. I spoke to the customers daughter a week or so later who confirmed they changed main board and all was well.
    Hope this helps

    Allan

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.