ISE 5-2 Bearing kit?

[iadom]

Re: ISE 5-2 Bearing kit?

Not yet Eddie, customer is away ATM. Only thing I can suggest is to strip it down and see if you can get the sizes off the old bearings. Unless you uplift to a workshop which I don’t that means at least two visits and the machine left in pieces in the customers kitchen. 😥

Have you done any ISE 5-2 bearings in the past. If you have you will know that at least one of the bearings in the kit I received is way to small.

Jim.

[kwatt]

Re: ISE 5-2 Bearing kit?

Sizes should be…

Bearing – 6306
Bearing – 6307
Seal – 40-80-10

If it’s that, they should be correct.

K.

[iadom]

Re: ISE 5-2 Bearing kit?

The ones in the kit I was sent this week are ,
6206ZZ and
6205Z so both of them are wrong.

The seal is a 35-62-10 so that is also incorrect.

This is a part ISE-2 kit but as my first picture above shows it is the wrong seal for an ISE-2 anyway.

[kwatt]

Re: ISE 5-2 Bearing kit?

Picked wrongly then.

I went and did it myself, correct set out tomorrow as too late to leave tonight.

K.

[iadom]

Re: ISE 5-2 Bearing kit?

I shall await the post, the thing is I knew the last set was wrong even before I opened them, I could tell by the light weight when the postie handed me the parcel.

“Should have gone to Specsavers”

[Author]

Posts