- This topic has 25 replies, 8 voices, and was last updated 18 years, 8 months ago by
.
-
Posts
-
kwatt wrote:Close over, bit of a push and it’s okay Ron as the weight pushing back pretty much closes it. I’ve not had an issue.
K.
There is a knack to closing Asko doors but once learned its very easy. Need to point that out on delivery and demonstrate it and explain the sprung tub/door assembly. they usually get the hag of it.
Damn, I disappointed… again.
I guess I should be used to it by now.
Please, please don’t take this train of conversation any further. 😉
K.
Hi All
Quick post confirming that the crrect spec 1600 AAA rated ISE 10 will be in our warehouse by Friday.
John
Re: ISE10…
It’s a while since I updated you on the ISE 10 Saga. Here goes.
The ISE 10 1600s which should have been in at the start of November to tied us over until the start of January when our long awaited container arrives, are silver and have been reject by myself. I can get access to them if you have a despirate need.
We were verbally offered £75 off the 1400 spin machines to keep them (an advance on £30), which I accepted with the intention of offering you guys £100 inc V.A.T to sell them through.
I then got the written confirmation what they had actually offered was £63 and request for imediate payment. I told them to take them back. If you want to take any assume a £75 discount off trade I said I’ll pay for what we sell and let them fetch what’s left, though I suspect there is a bit more negociatation before we get to that.
THE GOOD NEWS – We will have stock early January. We have indepentant verification from Asko (I don’t belief a word the UK agent tell me) that our slot has been confirmed for December 13th, ETA to follow.
Sorry for all the messing you about, I can assure you I have done my best through all of this but there is more to this than incompentance on behalf of the UK agent.
When we get final resolution I will distribute the e-mails to all people who have ordered / sold / are waiting for ISE 10s it will stagger your belief.
If anyone else made machines of as high quality as Asko I would have abandonded this long ago, but the product it brilliant so I have to waltz to get the solution which is best for us all.
You patients are appreciated.
John
Re: ISE10…
I wouldn’t mind betting that it’s possible to ‘convert’ the 1400 models to 1600? It might just involve a module change or (as in the case of some Bosch machines) a flick of a DIP Switch?
Just a thought? 💡
Re: ISE10…
Little update.
We’re continuing to sell through the 1406’s retail with the £100 discount as we are taking it that we’re getting a £75 plus VAT discount off them. This equates to £82 odds so it’s only £12 that we’re giving away, £10 if you minus the VAT which isn’t that bad really.
However, it is a case of, when they’re gone, they’re gone. 😉
It is probably possible to alter the spin speed but I ain’t messing with the PCBs. Plus it doesn’t get around the fascia markings or the lack of two options we wanted.
K.
- You must be logged in to reply to this topic.