ISE5-2 spin speed.

[iadom]

Question for you all.

ISE5-2.

If you set the machine to a spin only programme the display shows 10 minutes.

How long is the actual spin cycle with a perfectly balanced load and what speed does it spin at? 😉 🙂

Jim.

[timdowning]

Re: ISE5-2 spin speed.

I think it gets to about 5 minutes to go then thats it.

I would say 1200.

??????

[iadom]

Re: ISE5-2 spin speed.

Thats near enough.

Had a call today with a poor spin complaint. Turns out they had it on prog 7 synthetics wash.

Just to check I put it on a spin programme expecting it to run for 10 minutes and reach full, 1600 speed at the end. 😳

In fact it reaches approx 1000 rpm then at five minutes switches the motor off and the digital display then counts down the final five minutes in about 30 seconds.

I wish someone had told me before. 😉

I was about to order a new PCB but thought I would ask Sean first. 8)

Jim.

[timdowning]

Re: ISE5-2 spin speed.

It was mentioned here:

http://www.ukwhitegoods.co.uk/modules.p … light=ise5

But was sort of dismissed.

I haven’t had anyone question it luckily.

[iadom]

Re: ISE5-2 spin speed.

That one did slip under the radar. 😳

The user manual just says that when set to spin cycle it will spin at ‘normal’ speed, no mention of shut down after five minutes.

TBH this is the first time I have actually run one through a full ‘spin only’ cycle.

You live and learn. 8)

Jim.

[timdowning]

Re: ISE5-2 spin speed.

Jim, while i’ve got your attention….if you bump into an ISE5 dishwasher
can you try running the test cycle.

I couldn’t get it to play ball.

Cheers.

[iadom]

Re: ISE5-2 spin speed.

The only one I’ve seen was at Sibson. 😥

[Author]

Posts