IWDC6105 Indesit washer dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › IWDC6105 Indesit washer dryer

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 12, 2011 at 2:06 pm #65609
    scientist
    Participant

    Hi folks, have a problem with this unit.Set the programe ,door locks, starts to fill but stops. Approx 5mins later just drains out.I have seen issues on this with the PCB but can’t see any marks on the board. Think it could be an inlet valve issue?? Anyone else come across this?

    October 12, 2011 at 2:15 pm #361260
    iadom
    Moderator

    Re: IWDC6105 Indesit washer dryer

    Are you not getting any error messages? You should be able to test the valves electrically, they have been going O/C rather a lot lately.

    October 12, 2011 at 2:23 pm #361261
    scientist
    Participant

    Re: IWDC6105 Indesit washer dryer

    Had to leave flat before I could do full diagnosis due to the customer being a bit loopy!! So thought I’d run it by you guys. I would be 80{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure it was a faulty valve myself. Thanks for the swift reply.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.