- This topic has 4 replies, 3 voices, and was last updated 11 years, 4 months ago by
.
-
Posts
-
Guys, pnc number 916096804/00 model number jltdh15, turn it on to a program and nothing, display counts down but no drum action, put it in test mode and just comes up with est in display box as shown in photo, any help would be appreciated.
Re: John Lewis heat pump t dryer, helpppppppp
That error is associated with a motor error of some kind. If you email me I can send you the service manual.
Best of luck with that one. 😉
Re: John Lewis heat pump t dryer, helpppppppp
It’s a drum related error.
Accessing Diagnostics
The appliance must be turned off.
Turn the appliance on, turning the programme selector by one position in a clockwise direction.
Wait until the LEDs light up and the buzzer sounds, then press the START/PAUSE button and the first button to the left of it simultaneously.
Keep pressing the buttons until the LEDs start to flash and the buzzer sounds.
To Clear The Error
1. Start diagnosis mode as above.
2. Turn the programme selector in a clockwise direction to position ten.
3. Press the (start/pause) button and the first button to its left simultaneously.
4. Keep them pressed for approximately 5 seconds.
5. After deleting, E00 will be displayed.E5E is not listed as a fault code so I’ve no clue what it relates to other that, E is Error and 5 is motor/rotation related.
K.
- You must be logged in to reply to this topic.